our branch
Wuxi Zhongyue Petrochemical Equipment Co., Ltd.
Hubei Xianglong Chemical Equipment Engineering Co., Ltd.
Hongda Steel Im& Ex Co., Ltd.
HOT NEWS
-
Industrial waste gas treatment recovery unit solution
-
How to filter and dry three-in-one equipment
-
Industrial waste gas pollution hazards and treatment
-
Jinjiang Chemical 100,000 tons / year n-butyl acrylate cooperation project
-
Electroplating wastewater treatment
-
What are the classifications of industrial wastewater?
-
Microbial treatment technology for industrial waste gas
-
Zero discharge treatment technology for desulfurization wastewater
-
High concentration ammonia nitrogen wastewater treatment technology
-
Factors affecting the treatment of waste gas in the chemical industry
Reaction Equipment
Position:HOME > PRODUCTS >Pharmaceutical and chemical equipment > Reaction Equipment >
Stainless Steel Reactor
Product description
The reactor consists of a pot body, a pot cover, a mixer, an electric heating oil clamp, a support and transmission device, a shaft encapsulation device, an oil spill tank, etc., and is equipped with an electric heating rod, a temperature and a pressure gauge.
Owing to different production processes and operating conditions, the formation of stir usually has anchor, slurry, turbine, propulsion or frame. There are two kinds of support pedestals: suspension type and support type.
The heat conducting oil is placed in the jacket and heated by the electric heating rod. On the jacket, there are nozzle holes for inlet, outlet, overflow measurement, vent, electric heating rod and temperature measurement. The outer wall of the jacket is welded with a support, and the lower part of the pot body is provided with a discharge opening.
Parameters The reactor consists of a pot body, a pot cover, a mixer, an electric heating oil clamp, a support and transmission device, a shaft encapsulation device, an oil spill tank, etc., and is equipped with an electric heating rod, a temperature and a pressure gauge.
Owing to different production processes and operating conditions, the formation of stir usually has anchor, slurry, turbine, propulsion or frame. There are two kinds of support pedestals: suspension type and support type.
The heat conducting oil is placed in the jacket and heated by the electric heating rod. On the jacket, there are nozzle holes for inlet, outlet, overflow measurement, vent, electric heating rod and temperature measurement. The outer wall of the jacket is welded with a support, and the lower part of the pot body is provided with a discharge opening.
Nominal capacity (L) |
Actual capacity ( L) |
Power (KW) |
Jacket capacity (L) |
Inner pot size (φmm) |
Outer pot size (φmm) |
Reducer Model |
Motor power (n/kw) |
Agitation speed (n/min) |
50 | 61 | 3×2 | 95 | 400 | 600 | m3 | 1450/0.6 | 60-80 |
100 | 120 | 6×2 | 120 | 500 | 700 | m3 | 1450/0.6 | 60-80 |
200 | 247 | 6×3 | 200 | 600 | 800 | m4 | 1450/1.5 | 60-80 |
300 | 35.5 | 6×3 | 250 | 700 | 900 | m4 | 1450/1.5 | 60-80 |
500 | 589 | 9×4 | 290 | 900 | 1100 | m6 | 1450/2.2 | 60-80 |
1000 | 121.5 | 12×4 | 560 | 1200 | 1400 | m8 | 1450/4 | 60-80 |
2000 | 2244 | 15×5 | 750 | 1400 | 1600 | m8 | 1450/4 | 60-80 |
3000 | 3201 | 15×5 | 1015 | 1600 | 1800 | m8 | 1450/7.5 | 60-80 |
4000 | 4020 | 15×5 | 1226 | 1600 | 1800 | m10 | 1450/7.5 | 60-80 |
5000 | 5170 | 18×5 | 1400 | 1800 | 2000 | m10 | 1450/7.5 | 60-80 |
PREV:Tube-type Condenser
NEXT:Outer Coil Reactor